Pulse Industries Steam Trap Monitor - continuously monitor steam traps (15psi and greater) to detect open and closed failures. and set alerts for steam trap replacements. Reduce energy loss, CO2 emissions, equipment damage, unplanned shutdowns, and staff time dedicated to manual inspections of steam traps. Uses ultrasound, vibration, and temperature to detect failures vs others that rely on a single detection sensor.

7 year battery life. LoRaWAN connectivity.

Software platform for data storage, visualization, analytics, reporting, and alerts.

The RadioBridge equipment (pumps, motors, compressors, gearboxes, fans) vibration sensor detects signs of equipment failure. The vibration analysis and condition monitoring solution provides advanced predictive maintenance capabilities for rotating machines and other equipment. Continuous 24/7 monitoring of your assets will detect early signs of wear and warn you before a failure occurs, saving you downtime and expensive repairs.

LoRaWAN connectivity and software platform for data visualization, analytics, reporting, and alerts.

The NanoTag temperature sensor is a low-cost, scalable and trackable 100 micron thick PET film sensor that provides mechanical flexibility without compromising tensile strength or durability. Built-in data storage (24,000 temperature reads), battery, and LoRaWAN communications.

Used to monitor temperature for cold chain storage for both fixed locations (e.g. refrigerators, freezers) as well as mobile assets (e.g. refrigerated cargo).

The Vutility HotDrop electric submetering solution includes an easy-to-install, non-intrusive sensor that can measure energy consumption at the circuit-level or at the building-level plus the CloudVU IoT data platform for visualization, analytics, reporting, and alerts. API is also available.

Leveraging LoRaWAN's global IoT standards, the HotDrop is able to communicate out of electrical distribution panels through multiple stories of commercial and industrial building materials, while maintaining wireless, minute-by-minute transmissions to the cloud.

Enables facilities managers to gain better visibility into all of your utilities to end surprise bills. Provides data for preventive maintenance, to avoid unplanned outages and makes V&M audits easier to complete.

No batteries (self-powered) and no wires. Installs in less than 15 minutes without requiring the facility be de-energized.

Convert existing electric, gas, and water pulse meters into a connected, data-driven meter with the Vutility PulseDrop. The PulseDrop detects and tracks the number of pulses generated in any given time period, as well as the rate of consumption.

Connects with any existing pulse meter in minutes without any tools. Reporting intervals as frequent as every minute. Outdoor housing. 10 year battery life using LoRaWAN connectivity.

The CloudVu data platform provides visualization, analytics, and reporting. API is available as well.

Zurn’s connected wireless restroom faucets provides data on water usage and equipment condition. Enables facility managers to eliminate staff restroom inspections, improve preventive maintenance, and improve visitor experience.

Zurn’s plumbSMART software provides data visualization, analytics, reporting, and alerts. LoRaWAN connectivity.

Upgrade your restroom to connected technology with Zurn’s Aqua-Fit(R) Serio Series(R) Connected Sensor Faucet Retrofit Kits. Each battery- operated retrofit kit features wireless monitoring technology that provides insights, trends, and alerts on faucet valve usage count, water consumption, and preventative maintenance. Received real-time relief alerts and data trends 24/7 via a secure web portal. You can opt-in to text or email alerts and be notified immediately critical information. Ideal for use in high traffic restrooms in new or retrofit applications. mounted sensor faucet with a wireless monitoring feature. It provides product insights, trends, and alerts on faucet valve usage count, water consumption, and preventative maintenance. Received real-time relief alerts and data trends 24/7 via a secure web portal. You can opt in to text or email alerts and be notified immediately critical information. Ideal for use in high traffic restrooms in new or retrofit applications.

Zurn’s connected wireless restroom faucets provides data on water usage and equipment condition. Enables facility managers to eliminate staff restroom inspections, improve preventive maintenance, and improve visitor experience.

Zurn’s plumbSMART software provides data visualization, analytics, reporting, and alerts. LoRaWAN connectivity.

Zurn E-Z Flush® Retrofit Kits are reliable and easily installed sensor retrofit kits for converting manual flush valves to hands-free operation and enabling wireless connectivity. Ideal for commercial applications where converting to hands-free flush operation is desired. Installation is completed by simply removing existing handle and installing the side mounted sensor retrofit kit. Unit is sensor operated with battery powered and includes electronic manual override button.

Zurn Connected Flush Valve transmit data 24/7 to the Zurn plumbSMART web portal and mobile app. Proactively monitor your flush activations and water usage, receive real-time alerts for preset high and low usage parameters, and access system data for trends and predictive maintenance anytime and anywhere.

AquaSense® Sensor Flush Valves are ideal for high-use applications, ADA compliant, battery powered, and sensor operated for retrofit or new construction.

Unit is furnished with a clog resistant piston and manual override button. Included as standard are 4 “AA” Lithium batteries.

• ADA Compliant - Operational Controls

• WaterSense Compliant

• ASSE-1037/ASME A112.1037 / CSAB125.37

Compliance and Certification:

Product Features:

plumbSMART™ Portal

• Know water consumption

• Track uses per fixture

• Receive real-time alerts

• Manage maintenance tasks

• Receive insights on your data

Provide visitors with real time stall occupancy information with colored occupancy sensors and a public display screen with metrics.

Detects and alerts for water leaks.

- IP67 housing
- 5 Year Battery Life (option to add 2nd battery)
- LoRaWAN connectivity
- Easy Mobile App Set Up
- API available
- 1.5m cable
- Reports temperature and humidity

Detects and alerts for water leaks for locations where leaks are dispersed beyond a single spot.

- IP67 housing
- 5 Year Battery Life (option to add 2nd battery)
- LoRaWAN connectivity
- Easy Mobile App set up
- API available
- 3m cable
- Reports temperature and humidity

The COMFORT Base Smart Room Sensor detects, alerts, and reports for water leaks along with reporting other ambient air conditions.

- User configurable alarm thresholds
- Long battery life
- LoRaWAN connectivity
- API available
- 3m cable

The MultiTech battery-powered wireless water leak detector uses a water sensor probe to detect the presence of water or other liquids.

• An Armored Sensor™ IP67 weather-proof version with a rope leak sensor is also available for outdoor and industrial environment use.

• 5-10 year battery life

• Over-the-air configuration

• LoRaWAN connectivity

• API available

The QALSONIC W1 from Axioma is an unltrasonic submeter. No moving parts, highly accurate measurement of consumption, Eliminates measuring deviations caused by sand, suspended particles, or air pockets. LoRaWAN or NB-IoT connectivity.

The Dragino SW3L is a LoRaWAN Flow Sensor. It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to monitor the water usage for buildings.

SW3L is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 10 years. (Actually Battery life depends on the use environment, update period.)

The SW3L will send water flow volume every 20 minutes. It can also detect the water flow status and send Alarm, to avoid the waste for water usage such as broken toilet case.

SW3L is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.

004: DW-004 Flow Sensor: diameter: G1/2” / DN15. 450 pulse = 1 L

006: DW-006 Flow Sensor: diameter: G3/4” / DN20. 390 pulse = 1 L

010: DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L

The Dragino RS485-LN is a RS485 to LoRaWAN Converter. It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining/data communications cost.

RS485-LN allows the user to monitor / control RS485 devices, including smart metering for multifamily, commercial, and retail properties, and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

The Zurn Wilkins Connected Flood Control System includes a Backflow remote solenoid control shut-off valve, a relief valve sensor, and a zone pressure sensor. Solution connects to plumbSMART cloud-based platform for data visualization, analytics, and reporting. LoRaWAN connectivity.

The Sensoterra soil moisture sensor measures, reports, and alerts for “too dry” and “too wet” soil moisture sensors in order to better control water irrigation frequency and reduce water use. Software platform enables configurable alert thresholds and provides data visualization and analytics. LoRaWAN connectivity.

The Aquana SV1 provides leak, burst, and moisture detection and enable automatic shutoff when using a compatible water meter or wireless IoT leak detector. Stop water damage before it happens, giving your properties more damage protection than ever before. By adding water sensors to high-risk areas (like under water heaters or the washing machine), you can be alerted, close the valve, and dramatically limit any damaging amount of water.
The Aquana Smart Valve allows you and your team to open, close or reduce the flow of water remotely without having to send a technician to the site. The Aquana SV1 supports indoor applications where AC power is available and immediate closure due to pipe bursts is imperative.

Cloud-based software platform for data storage, analytics, alerts, reporting, and device configuration. LoRaWAN or LTE-M connectivity.

Leverage existing building water meters (outdoors and indoors) and automate reads and detect leaks. The strapped-on water monitor straps onto any existing standard utility water meter with magnetic registers … no plumbing is necessary. Installs in seconds.

The strapped-on water monitor also includes a temperature sensor built in that will alert you if the temperature gets too low.

Access to the NOWi console to view data and add alerts is not included and costs $99/year for each device with discounts on higher quantities.

Communicates via LoRaWAN over the Helium network.

The connected water includes a node and a high-precision water meter. This version of our water meter is best for locations where there is not already a utility water meter. This version will need to be plumbed in by a professional plumber.

The water meter comes in multiple sizes (3/4”. 1”, 1 1/2” Vertical and Horizontal Plumbing),

Access to the NOWi console to view data and add alerts is not included and costs $99/year for each device with discounts on higher quantities.

Communicates using the LoRaWAN network operated by Helium Networks. Strong signal strength and connectivity outdoors or indoors.

The COMFORT Base Smart Room Sensor measures, reports, and alerts for temperature, humidity, leaks/moisture, light (on/off), movement, shock, and open/closed doors and windows.

- User configurable alarm thresholds,
- Long battery life
- Wall or ceiling mount configurations
- LoRaWAN connectivity
- API available
- Small form factor
- Simple deployment

The BREEZE CO2 Smart Room sensor measures CO2 levels, temperature, humidity, light, and barometric air pressure.

- User configurable alarm thresholds
- Long battery life
- Wall or ceiling mount configurations
- LoRaWAN connectivity
- API available
- Small form factor
- E-Ink Room Display optional
- Simple deployment

The E-Ink Display is pairable with the BREEZE CO2 Smart Room Sensor for in-room data reporting.

- Reports CO2 level, temperature, humidity
- Wireless connection
- Wall or table/desk mounting

The EM300-TH measures and reports temperature and humidity levels.

- IP67 housing
- 5 Year Batter Life (option to add 2nd battery)
- LoRaWAN connectivity
- Easy Mobile App set up
- API available

The MultiTech Reveal Temperature Humidity Air Sensor measures temperature and humidity.

This indoor sensor uses air flow to measure temperature and humidity levels with accuracies of +/- 0.1 °C and +/- 1.5 %RH respectively. If the temperature and/or humidity rises above or falls below the configured thresholds, an alert is sent over the wireless network.

- User configurable alarm threshold
- Long battery life
- Wall or ceiling mount configurations
- LoRaWAN connectivity
- API available

Wireless battery-powered smoke and heat detector for any indoor environment.

• LoRaWAN connectivity

• Long battery life

• API available

Zurn’s connected probes can be integrated with Zurn’s Turtle Green Proceptor grease traps or retrofited into existing grease interceptors. Measures and alerts for grease, oil and sediment levels to prevent overflows and manage pumping frequencies. LoRaWAN connectivity.

The DECENT LAB Outdoor air quality sensor station measures up to four gases, including NO2, NO, CO2, OX, H2S, SO2, O3. The station also measures temperature and humidity. LoRaWAN connectivity.

The DECENT LAB Battery powered wireless indoor air ambiance station measures Co2, Total VOCs, Relative Humidity, Temperature. Barometric Pressure, and Motion. LoRaWAN connectivity.

The Oizom Dustroid is a Continuous Air Particulate Monitoring system to measure the concentration of dust particulates in the ambient air. The dust monitor range is capable of monitoring various sizes of particulates ranging from 1 micron to 100 microns such as Ultrafine Suspended Particulate Matter – PM1 (UFPM), Respiratory Particulate Matter – PM2.5 (RSPM), Suspended Particulate Matter – PM10 (SPM), and Total Suspended Particulates – PM100 (TSP). By using external modules one can also monitor meteorological parameters like wind speed, wind direction to identify PM dispersion and impact of dust levels in a vicinity.

Solar Power option. Cellular, NB-IoT, or LoRaWAN connectivity.

The Oizom Polludrone measures all major ambient parameters such as PM1, PM2.5, PM10, PM100, Carbon Monoxide (CO), Carbon Dioxide (CO2), Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2), Ozone (O3), Hydrogen Sulfide (H2S), Ambient Noise, Light, UV, Temperature, and Humidity. The Polludrone uses our patented e-breathing sampling technology that offers higher accuracy and near-reference data.

The Polludrone air quality monitoring system is communication agnostic. The device works on various wired and wireless communication protocols like GSM, WiFi, LoRA, Sigfox, NBIoT to transmit the data on the Oizom cloud in near real-time. Additionally, it has an inbuilt memory backup to ensure no data loss in network failure. Polludrone works seamlessly with Oizom IoT Terminal. Uses can visualize the data in a real-time dashboard, automated reports, and intelligent alerts on the platform. The data can also be accessible through Rest APIs for integration into 3rd party software and process automation.

The SPS-X smart parking sensors are LoRaWAN-based devices that utilize magnetic sensing, radar, Bluetooth, and AI.

• Real-time stall occupancy status and monitoring

• Industry leading accuracy based on multiple sensing

• Engineered for maximum reliability and robustness in any weather condition

• Ultra-long battery life

• Enables a variety of key analytics and insights

The SPS-X comes with an easy-to-use web app

The Move Solutions Triaxial Vibrometer monitors buildings near construction sites.

In almost all construction sites there are machines in action that develop great energy and consequent vibrations.

It is important to monitor the integrity of the neighboring structures.

With the use of Vibrometer devices it is possible to highlight any seismic vibrations, mainly induced by external factors, and monitor their risks. All sensors also record temperature, are battery powered and use the LoRaWAN wireless communication protocol.

Move Solutions’ cloud-based software platform provides data visualizations, analytics, reporting, and alerts

Move Solutions Tiltmeters positioned directly on the shoring piles make it possible to monitor the rotational trend during all phases of work of a construction site.

With the use of tilt beams, in addition to the inclination, it is also possible to obtain displacement with respect to a fixed point.

Move Solutions; software provides data visualization, analytics, reporting, and alerts. LoRaWAN connectivity.

The Move Node integrates third party wired or wireless sensors, such as crack meters, piezometers, and other geo-technical and environmental sensors to monitor new construction and existing building structural health.

Move Solutions’ software platform provides data visualization, analytics, reports, and alerts from integrated sensors. LoRaWAN connectivity,

The SenthiSYS Trial Kit includes up to 15 sensor devices and indoor gateways, connectivity, and software for 45 days. The Trial Kit is a low-risk path for seeing the benefits from deploying new wireless battery-powered sensors and their data insights.

The MultiTech Conduit® AP conveniently provides deep in-building connectivity and improved performance for network operators and enterprises connecting thousands of IoT assets by harnessing the power of the LoRaWAN® protocol.

Easy to deploy, the Conduit AP access point extends LoRa® connectivity in commercial buildings like hotels, convention centers, offices and retail facilities providing coverage in difficult to reach areas cell tower or rooftop deployments may not penetrate.

Ethernet or 4G LTE Backhaul.

The KONA Micro IoT Gateway is designed for enterprise and lightweight industrial applications that require “Always On” connectivity.

Configured with an internal 3G/4G modem and a built-in battery backup, the KONA Micro IoT gateway continues to operate and transmits sensor data to the network even when the main site has lost power.

Ethernet or Cellular Backhaul.